Resistor
The Resistor
The resistor is a fundamental electrical component in physical circuits as well as circuit analysis and equivalent circuits. All materials exhibit some form of resistance, some are greater than others, eg. copper, aluminium and gold are considered good conductors (low resistance), stainless steel, carbon, tungsten are average conductors (medium resistance), and then ceramics, mica and air are considered poor conductors (high resistance).
Units of Measurement
The modern day unit of measurement is the 'Ohm'. This unit was assigned in 1872. The mesurement standards for the Ohm reference has improved over time, and these are mainatined by NIST / NATA standards labortaories in temperatire controlled environments.
Given the wide range of resistance values and realted measurements, the Ohm is often prefixed with the the greek multiplier terms, eg. nano-ohm, kilo-ohm, meg-ohm. Resistors are also specified with a power handling capacity, in watts, eg. half-watt, 50 watt, 10kilo-watt etc.
The iunit of measurement for the nverse of Ohm (ie 1/R) is known a Siemens, often used in very low value resistance measurements.
Colour Coding
Traditional wire leaded resistors are typically colour coded to show their resistance value and manufactured tolerance. There are 3 or possibly 4 colour coding band, with examples of their values shown in the diagram in the right. The power ratings are not generally specified on the device, but is usually a function of the physical size of the resistor.
Resistor_Colours.png
